AIOC Utility

No AIOC device connected

Click Connect in the header to open the device picker.

Requires a browser with WebHID support (Chrome / Edge 89+) over HTTPS or localhost

Custom VID / PID (if you changed the USB IDs)

Vendor ID (hex)

Product ID (hex)

Leave blank to search for all known AIOC VID/PID pairs. The device is verified by its internal magic register regardless of USB IDs.

Device Info

Product—

Magic—

VID:PID—

GPIO Status

Waiting for report…

PTT1 OUT

PTT2 OUT

Vol+ —

Vol− —

PlayMute —

RecMute —

PTT outputs reflect button-press state. CM108 button inputs update live from device HID reports — labels show configured source from IOMUX registers.

Manual PTT State

PTT 1

PTT 2

PTT Sources

PTT1 Source

PTT2 Source

CM108 Button Sources

Button 1 – Vol Up

Button 2 – Vol Down

Button 3 – Playback Mute

Button 4 – Record Mute

Audio Settings

RX Gain

TX Boost

AutoPTT & VCOS Thresholds

VPTT (AutoPTT)

Level Control (decimal or 0x…)

Timing Control (decimal or 0x…)

VCOS (COS detection)

Level Control (decimal or 0x…)

Timing Control (decimal or 0x…)

Foxhunt (CW Beacon)

Volume (0–65535)

Speed WPM (0–255)

Interval seconds (0=off)

Message (max 16 characters)

USB VID / PID Override

Vendor ID (hex, e.g. 0x1209)

Product ID (hex, e.g. 0x7388)

⚠ Changing USB VID/PID takes effect after a reboot. Store first, then reboot. If you set a wrong value, you may need to use another tool (or re-flash) to recover.

Device Actions

Raw Register Dump

Register	Address	Value